GEMINUS creates corner alcoves with a 2-inch wide opening,
uniformly lit from both sides, for a more emphasized linear
lighting effect. A direct fit for 1/2-inch gypsum panels, it can
also be leveled with 5/8-inch ones, with the same ease of installation
and effectiveness as with other Gypsum Series profiles.
exterior surface reinforced with fiberglass for rigidity, finished in white plaster that is primable
and paintable like a regular gypsum panel.
• Flush installation with standard 1/2in. gypsum panels, or level out to 5/8in. panels with drywall
mud and tape, while supporting the edges over 2x1.5in. wall/ceiling beams.
• Direct fit for the 1100 and 1200 profiles in 6063-T5 aluminum for superior heat dissipation,
allowing the use of the full range of 1000 Series lenses, for full control of the lighting effect.
• Designed to give a uniform light without hot spots with an optiflex lens and a strip or PCB of
120 LEDs per meter or more.
• Application guide for 10mm (3/8-inch) LED strip or less.
• Available in sections of 8 feet (2.4m).
Fire Rated Material Type : NFPA CLASS C
(tested under ASTM E84. Similar to UL723, ANSI/NFPA No. 255 and UBC No. 8-1.)